Marygate packhorse bridge
Listed on the National Heritage List for England. Search over 400,000 listed places
Overview
- Heritage Category:
- Listed Building
- Grade:
- II
- List Entry Number:
- 1493159
- Date first listed:
- 30-May-2025
- List Entry Name:
- Marygate packhorse bridge
The Missing Pieces Project
Share your view of unique places. Almost 350,000 photos and stories have been added so far.
Location
Location of this list entry and nearby places that are also listed. Use our map search to find more listed places.
Use of this mapping is subject to terms and conditions .
This map is for quick reference purposes only and may not be to scale.
What is the National Heritage List for England?
The National Heritage List for England is a unique register of our country's most significant historic buildings and sites. The places on the list are protected by law and most are not open to the public.
The list includes:
🏠 Buildings
🏰 Scheduled monuments
🌳 Parks and gardens
⚔️ Battlefields
⚓ Shipwrecks
Local Heritage Hub
Unlock and explore hidden histories, aerial photography, and listed buildings and places for every county, district, city and major town across England.
Discover moreOfficial list entry
- Heritage Category:
- Listed Building
- Grade:
- II
- List Entry Number:
- 1493159
- Date first listed:
- 30-May-2025
- List Entry Name:
- Marygate packhorse bridge
- Location Description:
- Footbridge on the south side of the ford where Marygate crosses the Barton Beck within Barton, Richmond, North Yorkshire.
The scope of legal protection for listed buildings
This List entry helps identify the building designated at this address for its special architectural or historic interest.
Unless the List entry states otherwise, it includes both the structure itself and any object or structure fixed to it (whether inside or outside) as well as any object or structure within the curtilage of the building.
For these purposes, to be included within the curtilage of the building, the object or structure must have formed part of the land since before 1st July 1948.
The scope of legal protection for listed buildings
This List entry helps identify the building designated at this address for its special architectural or historic interest.
Unless the List entry states otherwise, it includes both the structure itself and any object or structure fixed to it (whether inside or outside) as well as any object or structure within the curtilage of the building.
For these purposes, to be included within the curtilage of the building, the object or structure must have formed part of the land since before 1st July 1948.
Location
The building or site itself may lie within the boundary of more than one authority.
- District:
- North Yorkshire (Unitary Authority)
- Parish:
- Barton
- National Grid Reference:
- NZ2307508660
Summary
Multi-spanned footbridge beside a ford, considered to have been built in the C18 or earlier as a packhorse bridge without parapets.
Reasons for Designation
Marygate packhorse bridge over Barton Beck is listed at Grade II for the following principal reasons:
Architectural Interest:
* a little altered example of vernacular bridge construction dating to the C18 or potentially earlier, the lack of parapets indicating its original use for packhorses, and the multi-span design being relatively unusual with packhorse bridges being more typically single-spanned;
Historic Interest:
* a physical reminder of the historical use of packhorses for transporting materials before the more general improvement of roads to better accommodate wheeled transport.
History
Marygate is believed to be the original east-west route within the village of Barton, crossing Barton Beck, also known as Waterfall Beck. The form and simple vernacular construction of the bridge (originally lacking parapets or handrails) indicates that it was built as a packhorse bridge in the C18, possibly earlier. The bridge is certainly shown on C19 maps, including the 1838 tithe map, and appears in a number of early photographs from the late C19 onwards. These photographs show the added handrails being of the same design as those in place at the time of inspection (2025): simple timber rails spanning between posts set into the ground, the posts abutting the bridge’s side elevations. The bridge probably escaped being widened for vehicle use because of the construction of a new bridge in 1821, which is thought to have resulted in Silver Street becoming the main east-west route through the village. The Marygate bridge was retained as a footbridge beside the ford and has subsequently undergone various repairs in modern materials, including the replacement of the original deck surfacing.
Details
Packhorse bridge, C18 or earlier.
MATERIALS: rough limestone rubble, handmade brick forming the arches, later repairs and deck surfacing in modern materials.
DESCRIPTION: The bridge, including its approach causeways, is just over 30m long and around 2m wide. It has three arches formed by single arch rings constructed with handmade bricks rising from rubble stone abutments. The central arch is segmental, the flanking ones are depressed but possibly built as three-centred basket arches. Each arch is of approximately equal span of just over 2m. At the time of the site inspection (2025) the stream was only flowing through the westernmost arch. To the east of the arches there is a culvert through the causeway forming a flood channel that is formed with undressed stone slab lintels.
Legal
This building is listed under the Planning (Listed Buildings and Conservation Areas) Act 1990 as amended for its special architectural or historic interest.
Map
This map is for quick reference purposes only and may not be to scale. This copy shows the entry on 14-Dec-2025 at 15:06:05.
Download a full scale map (PDF)© Crown copyright [and database rights] 2025. OS AC0000815036. All rights reserved. Ordnance Survey Licence number 100024900.© British Crown and SeaZone Solutions Limited 2025. All rights reserved. Licence number 102006.006.
End of official list entry